How To By Watches - 2015 Replica Watches
design modifications over and over, again and again patiently grinding, a back and forth operating under the careful assembly ...... microscope is both professional and technical challenge, but also a challenge for a good attitude, along with a step by step process, watch the Creative diagram assembled into a masterpiece of mechanical watches in the world always brings us a lot of surprises and unexpected. As more friends concerned about clocks, the precision of the watch movement more interested in mechanical watches are usually asked is how it worked? Compared to people just Fanfan answer, "the chain or pull its weight," then in the end is how to transmit power within the watch it? Here, we take you into the internal structure of the movement, between the temptation to solve your manual movement and automatic movement.
Theoretical knowledge smattering:
A basic movement of the table is from the crown to the winding drum, after winding the chain is loose when spring tour will open the drive winding drum rotates, this rotation movement will be via a gear and a continuation of the open go. First, turn the gear set, which includes minute round (plus hour rounds) and the second round, after the opening round of the urgency, the escapement arm, and finally to the balance spring and balance wheel. Transfer the entire power is such that a basic structure of the table, too, each one must be made mechanical watches are three basic system components.
These three systems is a dynamic system, drive train and control system. Take a very simple example, the movement is like a faucet, the faucet is escapement control system, control the size of the flow speed.
Dynamic mechanical watch is from the spring gossamer, put on chains like clockwork springs for water kettle. Mechanical automatic two points on chain and hand-wound, of course, is the first hand-wound, then only automatic winding. At this point, we say down on the chain, a lot of friends on this concept is not very clear. There is a long metal material within the circle, clockwork spring winding drum. Clockwork spring itself based on spring force, when the time was deliberately circle, there will be a desire to let go, to restore power. Constantly curled spring, clockwork spring power storage capacity will continue to increase until the winding spring can not be far in the ring, this is the time of the full chain is winding. Clockwork spring was able to store power is due to the spring itself has a capacity of reinstatement. Clockwork spring more tightly, the more energy that can be stored.
Release the energy you need to use escapement, the entire escapement with each other mainly by the balance wheel, springs, escapement wheel between the arm and the urgency to composition. After the power released by the winding drum, then via the transmission gear set (ie minute rounds, etc.) came to the last second round, second round will then connect with anxious round, anxious round about what to fluctuate, it will make the escapement arm vacillating. The escapement arm swing around the same time will be for the balance spring on the chain, put the chain and rotating balance wheel, balance spring put the chain on the chain tightened, loosen it will bundle the balance wheel while swaying.